Call Now: 7206009499

SUSPENDED LAMINAR AIR FLOW UNIT

Ceiling Suspended or Steel Stand Supported

The suspended Laminar Air Flow units are provided with

Suspension Chains to be suspended/hanged with the ceiling.

Optionally these chambers can also be fixed with support stands.

Chamber fabricated out of Stainless Steel (Grade S.S.-304)

Framework of M.S. tubulars with thick epoxy coating

(Fabricated strictly as per GMP Guidelines)

Following are the standard features of Suspended Laminar Air Flow Chambers -

Efficiency

99.97% (or above) down to 0.3 micron

Blower Unit

Centri-balanced, Centrifugal Motorized blower with

ISI (IS996-1979)marked motor, 1/3 H.P. 1440 RPM

Discharge

Air Volume 90cfm + 10%

Noise level

below 65dB

Illumination

By Fluorescent Tube,

Light Intensity - The intensity of the light at the

Work Surface is in between 800 to 1000 lux.

Germicidal

By Ultra-Violet Tube

Approx 50 microwatts per sq. cm on entire work Surface.

Electrical

All electrical fittings are as per I.S.I. standards.

All switches are placed on the front facia of the Chamber.

All wirings are protected with heat resistant material.

Mains are through M.C.B. for higher protection

2