Call Now: 7206009499

AC-091 FUME HOOD (WOODEN)

‘ACCO’ Fume Exhaust Hoods are designed to contain and exhaust toxic, Obnoxious or otherwise harmful gases, vapors, mist etc. to protect personnel and equipment. Amotor driven blower creates negarive pressure within the chamber, exracting the contaminated air from work-area and expel it in to the atmosphere. The Hood is ventilated of the air drawn from inside the laboratory which is used effectively for thorough sweep-out of work chamber.Fabricated out of best quality thick weather resistant board clad in mica lamination from outside, inner chamber finised in chemical-resistant Epoxy painted and work surface (table top) covered with ceramic tiles or S.S sheet.

To work on 220/230 V AC 50 Hz.

  • AC-091-01 size - 90 cms x 75 cms x 107 cms (3\\\'x2.6\\\'x3.6\\\')
  • AC-091-02 with cup board work table 3\\\'  90 cms x 75 cms x 195 cms (3\\\'x2.6\\\'x6.6\\\')
  • AC-091-03 size - 120 cms x 75 cms x 107 cms (4\\\'x2.6\\\'x3.6\\\')
  • AC-091-04 with cup board work table 3\\\'  120 cms x 75 cms x 195 cms (4\\\'x2.6\\\'x6.6\\\')
  • AC-091-05 size - 150 cms x 75 cms x 107 cms (5\\\'x2.6\\\'x3.6\\\')
  • AC-091-06 with cup board work table 3\\\'  150 cms x 75 cms x 195 cms (5\\\'x2.6\\\'x6.6\\\')

AC-093 FUME HOOD (CRCA POWDER COATED)

'ACCO' Fume Hoods are designed to contain and exhaust toxic, Obnoxious or otherwise harmful gases, vapors, mist etc. to protect personnel and equipment. A motor driven blower creates negative pressure within the chamber, extracting the contaminated air from work-area and expel it in to the atmosphere. The Hood is ventilated of the air drawn from inside the laboratory which is used effectively for thotough sweep-out of work chamber.

Fabricated out.of thick Mild Steel sheet, double chamber, outer and inner finished in epoxy powder coated with strong blower exhaust system, light arrangement & counter balanced sliding front sash. To work on 220 / 230V AC 50 Hz. Power plug with socket provided.

  • AC-093-01 with ceramic tiles work table - size - 90 cms x 75 cms x 107 cms (3'x2.6'x3.6)
  • AC-093-02   ------------- do ---------------      - size -120 cms x 75 cms x 107 cms (4'x2.6'3.6')
  • AC-093-03   ------------- do ---------------      - size -150 cms x 75 cms x 107cms (5'x2.6'x3.6')

AC-095 FUME HOOD (STAINLESS STEEL)

'ACCO' Fume Exhaust Hoods are desined to contain and exhaust toxic, Obnoxious or otherwise harmful gases, vapors, mist etc. to protect personnel and equipment. Amotor driven blower creates negative pressure within the chamber, extracting the contaminationed air from work area and expel it into the atmosphere. The Hood is ventilated of the air drawn from inside the laboratory which is used effectively for thorough sweep-out of work chamber.

The standard features of \\\'ACCO\\\'  Fume Hoods are-

  • Inbuilt Centrifugal Blower unit
  • Fluorescent tubes with safety electricals
  • Internally located Electric Plugs
  • Gas, Vacuum & Air Connectins
  • Counter balanced sliding up & down front sash (door)


01 4\\\\\\\' x 2\\\\\\\' 6" x 3\\\\\\\' 6"  duct size- 3" dia
02 5\\\\\\\' x 3\\\\\\\' x 3\\\\\\\'6"       duct size- 4"dia
03 6\\\\\\\' x 3\\\\\\\' x 3\\\\\\\'6"       duct size-  5" dia
 

2