AC-072S  LAMINAR AIR FLOW (VERTICAL) STAINLESS STEEL

Same as Horizontal model, but the air drawn vertically on theWork stage, An Exhaust system can be provided (Optional) at the bottom of the Unit to throw the air outside the Work. place.
 

AC-073S LAMINAR AIR FLOW (BIO SAFETY) . STAINLESS STEEL

Ultra Clean AirWork Station, Vertical type, made of sturdy board, all sides covered with Mica, Work stage thoroughly lined with Stainless Steel (S.S. -304 or 316) with illumination by fluorescent tube lights. The unit is complete with H.E. P.A. filtered clean exhaust duct. Efficiency u to 99.97%, retaining particles up to the size oF0.03 micron. To work on 220 / 230V AC 50 Hz.
 

AC-081 FUME HOOD (WOODEN)

Fume Exhaust hoods are designed to contain and exhaust toxic. Obnoxious or otherwise
harmful gases, vapours, mist etc. to protect personnel and equipment. A motor driven blower created negative pressure within the chamber extracting the contaminated air from work area and expel it in to the atmosphere. The hood is ventilated of the air drawn for inside the laboratory which is used effectively for through sweep out of work chamber. Fabricated out of best quality thick weather resistant Duroboard clad in Mica Lamination from outside, Inner chamber finished in chemically-resistant Epoxy paint and work surface covered with glazed tiles and counter balanced slid ' ing Sash Fluorescent tubes are fitted inside. A gas tap and an electric plug is also provided to work on 220/230 V AC 50 Hz power plug.

A work bench/ Table (optional) to install the equipment any where in the lab can be supplied. The work bench is fabricated out of square steel pipe or hard wood and have a cupboard and a drawer.
 

AC-082 FUME HOOD (mild STEEL)

Fabricated out.of thick c.r.c.a. sheet, double chamber, outer triple layer enamel painted and inner finished in apoxy & lined with compressed a asbestos sheet with strong blower exhaust system, light arrangement & counter balanced sliding sash. To work on 220 / 230V AC 50 Hz. Power plug with socket provided.

Size- Wdt. Dpt. Ht. Exhaust Duct No. 122

01 4' x 2.6'x 31/2' 3" dia
02 5' x 3' x 31/2' 4"
03 6' x 3' x 31/2' 4"

<< BACK ::

E.mail : Info@accoindia.com